Preparation work

在安裝電動伸縮篷之前，需要進行準備工作。確保您擁有正確的安裝工具，如螺絲刀、扳手等。仔細閱讀安裝說明書，并準備好所有的零件和配件，確保安裝順利進行。

Before installing the electric telescopic roof, it is necessary to first carry out preparatory work. Ensure that you have the correct installation tools, such as screwdrivers, wrenches, etc. Carefully read the installation manual and prepare all parts and accessories to ensure smooth installation.

確定安裝位置

Determine installation location

根據您的需求和實際情況，選擇合適的安裝位置。電動伸縮篷通常用于戶外空間，如露臺、陽臺、花園等。確保安裝位置平整、穩固，并且沒有障礙物影響伸縮篷的正常操作。

Choose the appropriate installation location based on your needs and actual situation. Electric retractable canopies are commonly used in outdoor spaces such as terraces, balconies, gardens, etc. Ensure that the installation position is flat, stable, and there are no obstacles that affect the normal operation of the telescopic canopy.

安裝支架和支撐結構

Install brackets and support structures

根據安裝說明書，將支架和支撐結構固定在安裝位置上。確保支架穩固可靠，可以承受電動伸縮篷的重量和外力影響。使用適當?shù)穆萁z和固定件進行固定，確保安裝牢固。

According to the installation manual, fix the bracket and support structure in the installation position. Ensure that the bracket is stable and reliable, and can withstand the weight and external forces of the electric telescopic roof. Secure with appropriate screws and fasteners to ensure secure installation.

安裝電動系統

Installing the electric system

將電動系統安裝到支架上，并與電源連接。根據安裝說明書，將電動馬達、開關和控制器等組件正確連接。確保電動系統的線路可靠，并遵循正確的電源接線方法。

Install the electric system onto the bracket and connect it to the power supply. According to the installation manual, correctly connect the components such as the electric motor, switch, and controller. Ensure the safety and reliability of the electrical system wiring and follow the correct power wiring method.

安裝篷布和調整

Installation of tarpaulin and adjustment

根據安裝說明書，將篷布正確地安裝在支架和支撐結構上。確保篷布平整、緊密，并且沒有皺褶或松弛。根據需要，使用調整裝置調整篷布的張力和傾斜角度，以獲得理想的遮陽效果。

According to the installation instructions, install the tarpaulin correctly on the bracket and support structure. Ensure that the tarpaulin is flat, tight, and free from wrinkles or looseness. Adjust the tension and tilt angle of the tarpaulin using an adjustment device as needed to achieve the desired shading effect.

測試和調試

Testing and Debugging

安裝完成后，進行測試和調試，確保電動伸縮篷的正常運行。按下開關或遙控器，觀察篷布的伸縮和停止操作是否正常。檢查電動系統的各項功能，如速度調節、自動停止等。

After installation, conduct testing and debugging to ensure the normal operation of the electric telescopic roof. Press the switch or remote control, and observe whether the tarpaulin telescopes and stops normally. Check the various functions of the electric system, such as speed adjustment, automatic stop, etc.

正確安裝電動伸縮篷是保證其穩定性和使用效果的重要步驟。通過準備工作、確定安裝位置、安裝支架和支撐結構、安裝電動系統、安裝篷布和調整以及測試和調試等步驟，您可以順利安裝電動伸縮篷，享受便捷遮陽的舒適體驗。如有任何疑問或需要，您可以聯系我們的團隊，獲得進一步的幫助和指導。

The correct installation of the electric telescopic roof is an important step to ensure its stability and effectiveness. By preparing work, determining the installation position, installing brackets and support structures, installing electric systems, installing tarpaulins and adjusting, as well as testing and debugging, you can smoothly install the electric telescopic canopy and enjoy the comfortable experience of convenient shading. If you have any questions or needs, you can contact our professional team for further assistance and guidance.